Real questions. Straight answers.

Ask STEP 1: Simple Answers for Northeast Ohio Homes

The roofing, siding and exterior questions homeowners actually ask, answered in plain English from STEP 1 field experience.

42 answers

Planning your project

Do I need a full roof replacement, or can my roof be repaired?

That depends on the roof's overall condition and the source of the problem. A targeted repair may make sense when the surrounding roof is still serviceable and the repair can address the underlying issue. We look at the affected area, the remaining materials, and any recurring problems, then explain the recommendation and the reasons behind it.

Read the full guide →

Can you replace only part of my roof?

Sometimes. We consider the condition of the remaining roof, how the sections connect, and the details needed where new roofing meets existing materials. Your estimate identifies the specific roof slopes included. We also discuss appearance and matching limitations so you understand what a partial replacement will look like.

Read the full guide →

How do I know which roof issues need attention now?

An inspection helps distinguish problems that need prompt attention from conditions that can be monitored or included in future replacement planning. We explain what we observe, where the concern is, and why it matters. That gives you a clearer basis for prioritizing the work and planning your budget.

Read the full guide →

Can I send photos before scheduling an inspection?

Yes. Your property address, a few clear photos, and a short description of the issue are useful starting points. They help us understand the project and prepare for the next conversation. An on-site inspection may still be needed to identify a leak source, verify measurements, or evaluate conditions that photos cannot show.

Read the full guide →

How should I compare roofing estimates?

Compare the complete scope alongside the price. Look at the roof areas included, shingle product, underlayment, ice and water protection, flashing, ventilation, cleanup, wood-repair terms, and warranty details. Check which items are included and which are optional. Two estimates can have different prices because they describe different work. The shingles are one part of the installation. Ice and water protection, underlayment, starter shingles, edge metal, pipe boots, flashing, ridge caps, and ventilation details also matter. Our Northeast Ohio Weather Defense System identifies those components in your estimate so you can compare the materials and work included throughout the roof.

Read the full guide →

How to find the best roof for the price →

Can you show me an option that better fits my budget?

When suitable alternatives are available, we can explain how a different shingle, roofing system, or project scope would affect the price. We show what changes between the options so you can make an informed choice. Any separately priced work should be considered alongside the option you select.

Read the full guide →

What payment options are available?

Cash or check, credit card, and financing options can be reviewed with your proposal. Your project documents identify the payment schedule and any applicable differences in total cost. Financing is subject to lender approval and current terms, so review the actual offer before choosing a payment method.

Read the full guide →

Understanding the roofing system

What is included in a roof replacement besides the shingles?

A roofing system includes protective layers and details beneath and around the shingles. For our Northeast Ohio Weather Defense System, your estimate identifies the specified ice and water protection, underlayment, edge materials, starter shingles, flashing work, roof-opening details, ridge components, and ventilation work. Cleanup and separately priced options are also identified so you can review the complete scope.

Read the full guide →

Why do dormers, chimneys, and roof-to-wall areas need special attention?

These areas contain joints and transitions where water needs to be directed carefully. Flashing and related details help move water away from those connections. A leak can involve one of these details even when nearby shingles look serviceable, so the condition of the connections matters alongside the condition of the shingles.

Read the full guide →

Why might a porch or low-slope roof need a different material?

Roof slope affects how water drains. Depending on the pitch and design, a porch or other lower-slope section may need a different roofing material or installation method from the main roof. The product selected for each area needs to suit that roof's conditions and the manufacturer's requirements.

Read the full guide →

How can I choose a shingle color with confidence?

Consider the color alongside your siding, brick or stone, trim, and gutters. Lighting and screens can change how a color appears, so digital previews are a guide to the overall look. Reviewing physical samples or a completed roof when practical can help. Available colors depend on the product selected and local availability.

Read the full guide →

Roof decking and attic ventilation

Why might the wood beneath my roof need to be replaced?

Roof decking is the surface the roofing system attaches to. Deteriorated or otherwise unsuitable wood may not provide the support and secure fastening the new roof requires. The need for repair or replacement depends on the actual condition and suitability of the decking.

Read the full guide →

Can every wood repair be identified before work begins, and how is it priced?

Some conditions become visible only after the existing roofing is removed. When concealed wood repairs are needed, we document the condition and explain the work involved. Your estimate or agreement explains how additional wood work is priced, including any listed allowances or unit prices. Reviewing those terms beforehand helps you understand how concealed repairs could affect the final price.

Read the full guide →

Does every house need a ridge vent?

Ventilation depends on how the roof and attic are built. In a vented attic, intake and exhaust need to work together. We consider the available airflow paths and the existing roof layout before recommending changes. A ridge vent alone may not address inadequate intake, and homes without soffit intake may need another approach.

Read the full guide →

Will a new roof stop ice dams?

A new roofing system can improve protection against water intrusion, but ice dams can also involve heat escaping into the attic, insulation, and ventilation. If your home has recurring ice dams, those conditions deserve attention too. The right plan may involve both roofing details and attic improvements.

Read the full guide →

Scheduling, cleanup and exterior work

How long will the work take, and what happens if the weather changes?

Call Today: Your New Roof, Just 7 Business Days Away! Rain, wind, and temperature can affect safe access and material installation. We discuss the expected schedule for your project and communicate changes when conditions affect the work.

Read the full guide →

What cleanup is included after a roof replacement?

Roof cleanup includes removing roofing debris and performing magnetic sweeps of accessible work areas. We also review the remaining project details as the work wraps up. If you notice something that needs attention, let us know so we can review it.

Read the full guide →

Are gutters, gutter guards, soffit, and fascia included with a new roof?

Those items depend on the scope you select. Gutters, downspouts, gutter guards, soffit, fascia, skylights, and other exterior work are included when listed in your proposal. Reviewing them as separate scopes or options makes it clear which items will be replaced, retained, or added.

Read the full guide →

Can I keep my existing downspouts when replacing the gutters?

Your existing downspouts may be reusable, depending on their condition and how they fit the planned gutter work. We consider the existing arrangement and identify any proposed replacements or additions in the estimate. Reusing suitable components can be part of a clearly defined project scope.

Read the full guide →

What is hidden-vent soffit?

Soffit finishes the underside of a roof overhang. Vented soffit can provide an intake path for a vented attic, while hidden-vent designs place the ventilation openings within the panel profile for a less noticeable appearance. The vented area still needs an open airflow path and suitable exhaust ventilation to function as intended.

Read the full guide →

Warranties, insurance and project records

What should I understand about roof warranties?

Product-defect coverage and workmanship coverage address different issues. Compare what is covered, how long each part of the coverage lasts, and the applicable conditions, exclusions, and registration requirements. A warranty term is not a guaranteed service life for the entire roof. The written warranties applicable to your selected project are the documents to rely on.

Read the full guide →

Can you help document roof damage for my insurance company?

We can assess the roof's condition and provide construction documentation, such as an estimate, relevant photos, and a description of the work. Your insurer determines coverage under your policy. These records give your insurer a clear description of the observed conditions and proposed work.

Read the full guide →

Why might the first insurance payment be less than the roof estimate?

Insurance payments can reflect the deductible, depreciation, and the policy's settlement terms. Some policies allow eligible depreciation to be recovered after repairs; others do not. Ask your insurer to confirm what is covered and which documents and deadlines apply. Your construction agreement separately explains the project price and payment responsibilities.

Read the full guide →

Can I get documentation of my completed roof for my records or insurance?

We can provide a summary of the completed work and relevant product information, along with a paid receipt once payment is complete. Photos or other project records may also be useful. Your insurer decides whether the completed work qualifies for a policy update or discount based on its requirements and your policy.

Read the full guide →

Northeast Ohio Weather Defense System

Why is water dripping behind my gutters?

Water needs a clear path from the roof into the gutter. If the roof-edge flashing does not overlap the gutter correctly, runoff can travel behind it. The fascia coverage, gutter position, and drainage conditions also need to be checked. At STEP 1, we look at how those parts work together so the recommended repair addresses the path the water is taking.

Read the full guide →

What is a gutter apron, and when is it needed?

A gutter apron is metal flashing that helps carry water from the roof edge into the gutter. Its shape and reach can help close an inadequate transition between the roof and gutter. The appropriate flashing depends on how the roof edge, fascia, and gutter meet. We evaluate that connection to determine the detail needed for your home.

Read the full guide →

Why does STEP 1 use 1.5-inch aluminum drip edge?

The roof edge is where water leaves the roofing and passes over the fascia or into the gutter. Our Northeast Ohio Weather Defense System includes 1.5-inch aluminum drip edge as part of that protection. We pay attention to its coverage and how it fits with the fascia and gutters, helping direct runoff away from exposed wood.

Read the full guide →

Why do you use two rows of ice and water protection at the eaves?

The lower roof edge deserves particular attention because ice buildup can cause water to back up beneath the shingles. Our standard Northeast Ohio Weather Defense System includes two rows of ice and water protection at the eaves, along with protection in valleys and other specified areas. The final coverage is planned around the roof's slope, overhang, and installation requirements. Ice and water protection is a self-adhering layer beneath the roofing that helps protect the roof deck from water intrusion in vulnerable areas, including eaves and valleys. The locations and coverage depend on the roof design, applicable installation requirements, and selected scope. Your proposal identifies the protection included.

Read the full guide →

Why do starter shingles matter along the sides of the roof?

The bottom and sloped side edges of a roof need a properly installed starter course. Starter shingles help establish the seal at those edges and reduce the risk of wind lifting the shingles. Our Northeast Ohio Weather Defense System includes starter shingles along both the eaves and the rake edges as part of the roof's perimeter protection.

Read the full guide →

What does synthetic underlayment do beneath the shingles?

Underlayment provides an additional water-shedding layer beneath the shingles, helping protect the roof deck if water gets past the outer roof covering. Synthetic underlayment is included in our Northeast Ohio Weather Defense System. Your estimate identifies the material being installed so you can understand the protection beneath the finished roof.

Read the full guide →

Are the seals around roof pipes addressed during replacement?

Where a plumbing vent passes through the roof, a properly fitted pipe boot and flashing help keep water outside. Our Northeast Ohio Weather Defense System includes new pipe boots for standard plumbing-vent penetrations. We address those connections as part of the roofing work, with any special vent or penetration details identified for the project.

Read the full guide →

Why do the roof's hips and ridges need their own shingles?

Hips and ridges are the lines where roof surfaces meet. Hip and ridge shingles are designed to cover and protect those locations while completing the roof's appearance. Our Northeast Ohio Weather Defense System includes the specified hip and ridge components alongside the main shingles, so those finishing details are part of the written scope.

Read the full guide →

Gutters

Five-Inch vs. Six-Inch Gutters

Five-inch gutters work on many simple rooflines. Six-inch gutters make sense when larger roof areas, steep slopes or concentrated valleys create more water than the smaller gutter, outlet and downspout system can manage.

Read the full guide →

Siding

What Should Be Behind Vinyl Siding?

Behind vinyl siding should be a sound, reasonably flat wall assembly with a correctly planned water-resistive and drainage layer. The exact layers depend on what the home already has and what the selected siding system requires.

Read the full guide →

Why House Wrap and Wall Flashing Matter

Vinyl siding is not the wall's only water defense. House wrap or another approved water-resistive layer, properly integrated with window, door and penetration flashing, helps direct wind-driven rain back outside.

Read the full guide →

Can Vinyl Siding Go Over Old Wood Siding?

Sometimes, but only after the old wall is exposed and evaluated. Sound wood siding can sometimes remain as part of the assembly, but rot, loose boards, uneven surfaces, missing water management and incompatible details cannot simply be covered and forgotten.

Read the full guide →

Roofing

What to Do After Wind or Hail Damage

Stay off a wet or damaged roof, photograph what you can safely see, limit active water entry and have the property documented before permanent repairs. A contractor documents construction conditions; the insurer decides coverage.

Read the full guide →

What Does Zippering on a Shingle Roof Mean?

Zippering is a connected pattern of lifted or released shingle tabs, often running across or up a roof slope. It can result from wind acting on unsealed or weakened shingles, but the cause and repairability have to be evaluated on the actual roof.

Read the full guide →

Are Exposed Roofing Nails a Problem?

An exposed nail can become a water-entry point when it is in the wrong place, backed out, rusting or no longer sealed. Some roofing details use exposed fasteners intentionally, but they still need the correct fastener and weatherproofing method.

Read the full guide →

Windows & doors

Should There Be a Gap Between a Window and Vinyl Siding J-Channel?

Vinyl needs room to move with temperature, but a visible, uneven or poorly sealed gap is not automatically acceptable. The window, flashing, trim and J-channel should create a clean detail that allows movement and directs water outside.

Read the full guide →

Exterior details

What Should Happen Where Electrical Conduit Enters Siding?

The siding should finish cleanly around the conduit while the wall opening is protected from water and the electrical equipment remains accessible. The exact fix depends on conduit size, movement, existing wall layers and who owns the equipment.

Read the full guide →

Does an Exterior Light Have to Move During a Siding Project?

Not automatically. A siding crew can normally reinstall a compatible fixture at the existing electrical box. Raising, lowering or moving that location is different work because it can require relocating the box and wiring.

Read the full guide →

Help build the next answer

What are you trying to figure out?

Send the question exactly how you would ask it. If other homeowners are likely wondering the same thing, STEP 1 may turn it into the next simple answer.

Send a Question

Take the first step

Tell us what is going on.

Share the property, concern, urgency and a few clear photos. We will help identify the right next move.

Free project estimateStep 1 of 2 · about 60 sec

Free estimates are available for planned projects. If your request may require a diagnostic or emergency service charge, we’ll explain it before scheduling.

What can we help with?

No calendar maze. The STEP 1 team reviews your request and follows up with clear next steps.

CallEstimateText